There is always a need to clean the CPAP machine immediately after use, leave it clean awaiting the next time of use. There are a lot of cleaning methods that are involved in cleaning the CPAP machines and they have different styles of working. This article centers on “how do CPAP cleaners work”.
It is important therefore to understand how the cleaners work but before we get to that, we have to know the available types of CPAP cleaners. However, note that some methods such as handwashing do not require special cleaning machines to work.
The simple option is the use of recommended sanitizing agents as well as high-level sterilizers. So how do CPAP cleaners work? Let’s find out.
Types Of CPAP Cleaners
As far as CPAP cleaner machines are concerned, our focus is on the two main types of mechanized cleaners; the UV based CPAP cleaner and the ozone-based cleaners. Both of them are small machines that use the provided mechanism to clean the CPAP machine.
In the case of ozone, ozone gas is again a compound that is used and it is, therefore, let out in recommended amounts in specific areas of the machine to make it clean. In the case of UV, the cleaner releases a concentrated channel of the recommended intensity of ultraviolet light into the parts that need cleansing.
Noticeably, the cleaners are named according to the cleansing agents they use. Ozone and UV light are the cleansing agents that are commonly used. As already hinted, there is a difference in how they work but the task they perform is quite similar. It is therefore important to understand how they work separately.
How Do Ozone-based CPAP Cleaners Work?
We are talking about ozone-based CPAP cleaners, therefore, it is important to understand that the main idea behind such a machine is the use of ozone, which is quite difficult to tap directly and use.
What happens with this cleaner is that it utilizes ozone gas in regulated amounts to clean up the CPAP machine. Some even think it never works because it is not even visible, the gas. The truth is that it works out very well.
The bacteria and the microparticles that harmful to the user are subject to the ozone gas and what it does the moment it is released is to make sure they’re dead as soon as possible.
Ozone has ac, however, be poisonous as well as corrosive. Cleaners that apply the use of ozone gas therefore majorly make sure that it is safely compressed and within no range of possibility and ability to hurt humans.
Taking that into consideration, there is a lot of safety measures that are put in place by the manufacturers and it is important to follow them. Many ozone-based cleaner instructions include leaving the cleaner to stand for some time before getting back to its use again.
This is basically to make sure that the user is safe from the concentration of ozone gas. The mechanism of work for such a machine is simply the use of ozone in regulated concentration to clean the CPAP equipment.
How Do Uv Based Cleaners Work?
The UV based CPAP cleaners are basically machine cleaners that are able to generate and channel ultraviolet light towards the recommended surfaces to be cleaned on a CPAP machine. The small cleaner is bound to certain wavelengths and intensities of UV light.
Some manufacturer specifies the time the machine should be on and how it should be used then while. others only say how it should be used. The cleaner is therefore majorly dependent on the amount, intensity, and time of use of the UV light to clean the CPAP machine.
Unlike in washing, the machine does virtually everything. Hand washing requires the use of the recommended cleaning agents. The machines only need handling and nothing more. The cleaners usually do a good job because they can kill the microorganisms that are. We have just seen what they use to clean up the CPAP machine.
Why Should We Use the Cleaners?
The cleaners are there to give us some easy time when we are cleaning our CPAP machine. To make sure that any little microorganisms that might cause more sickness is done away with.
This is the major reason why the cleaners are used. As to the effect of handwashing, the cleaners work out better since there might be some microorganisms, so slight that some cleansing agents cannot get to clean.
In such cases, ozone or UV light might help wipe out the slightest micro bacteria within such a short time. Having known this, it might be even easier to answer our question; how do CPAP cleaners work?
Which Parts Are to be Cleaned on a CPAP
While using a cleaner, as part of the functionality, we need to know which part of the CPAP is to be cleaned and which one is not to be. The main parts are the gasket, which is commonly referred to as gas masks.
They should be clean since they are the final channel towards the human breathing system, meaning any slight contamination might lead to problems that might cause further ailments.
The hose is also to be kept clean. It is part of her channel that fixes the mask to the machine. Slight contamination would also mean that the user if the CPAP is bound to inhale contaminated air. The main part that should not be forgotten is the humidifier of the CPAP.
Any contamination within this part might cause someone to directly inhale contaminated air since it is the part responsible to generate the clean air that is channeled towards the user’s gasket.
How Do CPAP Cleaners Work – Conclusion
Like every other piece of equipment, there is a need to make sure that the CPAP machine is clean. The level of sanity should be very high since the air that is generated is directly inhaled through the gas mask into the breathing system of the user. However, how do CPAP cleaners work?
We have seen that the cleaners are the best option and how they do it was our major concern in this discussion. It is better we are a little familiar with it now so that we know how to use and handle them in the future. The cleaners should be easy to use and at the same time good for human health in general.
